I have an Airport Express Base Station to extend the range of a standard Airport Extreme Base Station. Posted on Sunday, Octo07:41 GMTThanks, Brenden! If this becomes popular, I will add a section on playing 5.1 DTS audio from your computer to your Home Theatre system! Select your speakers and then hit play on a song. Start up iTunes and at the bottom you will see a drop down box with your Airport Express Speaker name down there. I would recommend getting the unit working without encryption or security first and then enabling it. Ensure you copy the key correctly from the router config putting a $ before the key! If you do not put a $ before the key it will not work. If you are using WEP 128 bit security, uncheck the "Use PC friendly WEP password" even if you're using a PC router. Unplug the AP Express from the network and electricity.Ĭonnect it to your stereo via optical or standard mini to rca cable.Ī note on security. If you feel so inclined give another password.Ĭlick update and allow the unit to come back online (green LED on outside) Give your speakers a name, this will show up in iTunes in your speaker selection. On the Internet Tab click "connect using wireless network" and configure IP via DHCP If you do not type the name of the network exactly, the system will NOT work.Ĭlick Change Password, and change your password! Type the name of your linksys router, default is linksys. Give your AP Express a name in the Identy field Select the AP Express from the list and click Configure Start the Airport Admin Utility, not the Airport Express Assistant. Upon initial setup of your AP Express, I would recommend connecting it via Cat5 to your router or wired network. The Airport Express is now both MAC and PC compatible! You can connect a Switch to the Ooma Telo Home port, and connect serveral devices to the Internet through the Ooma Telo Home port function.Posted on Friday, Octo18:25 GMTI thought I would write a guide to integrating the new Apple Airport Express into your HT setup. (An Ooma Telo reboot may be required after the network cable is disconnected from the Ooma Telo Internet port). Then go into Ooma Setup>Wireless page and place an check mark in the box in front of Network Name, then click on the Delete button, (you cannot reuse the previously scanned and entered Wi-Fi network information). If you get this far and the Ooma works okay, go back into the Apple Airport Express and set the Wi-Fi network security level to WPA2PSK/AES (or near this level). Make sure you have the Wi-Fi Internet connection. Enter the Apple Airport Express Wi-Fi password. Place a check mark in the box in front of the Network Name that you plan on using (your Apple Airport Express Wi-Fi network). Then go into Ooma Setup>Wireless page and place an check mark in the box in front of Network Name (if there is any networks found), the click on the Delete button, (you cannot reuse the previously scanned and entered Wi-Fi network information). Next access the Apple Airport Express and temporarily set the Wi-Fi security level to off. Using an Ethernet cable, connect the HOME NETWORK port on the back of your Telo to a computer) nothing works.įirst make sure the Apple Airport Express Wi-Fi network is setup and has a password. dapter-faq (Plug the Adapter into the USB port on the back of your Telo. If I follow the connection instructions on. After a short time the Wireless Settings Screen says "No active wireless networks" and network name is "none." It also allowed me to go to and scan for wireless networks, select mine, enter the password. That allowed Ooma to connect and deliver a dial tone. Turn on the Modem, wait til it gets online, then Ooma, wait until all lights turn blue, then turn on Airport Express. Connect Airport Express to Ooma's "Home Network" port.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |